Dog Booster Seat Care & Use Guide
Thank you for purchasing the Solvit Products Pet Booster Seat. The Booster Seat is designed to fit on all vehicle seats with headrest.
Assembly: The carton should contain the rectangular seat section, one removable fabric liner, one long adjustable headrest strap, one short adjustable safety leash (two on the XL model) and one black, metal support bracket (comes as two pieces on the XL model).
Step 1: On XL models only, connect the two L-shaped sections of the metal support bracket into a U-shape so the arms are about 16” long each, and the back is 18” across. Insert the metal support bracket into the seat section so the two “arms” of the bracket face forward and the “back” section aligns with the lower back inside edge of the seat (the edge with the D-ring installed). Insert each end of the bracket “arms” into one of the rubber tubes located at the top left and right corners of the seat (refer to see-through image at right).
Step 2: Position the fabric liner so the small hole in the lower inside seam aligns over the D-ring sewn in the interior bottom of the seat. Pull the D-ring through the small hole and attach the leash strap. Next, pull the D-rings on the upper back edge of the seat through the small holes near the top of the liner. Wrap theliner over the upper edges of the seat so the hook-and-loop pieces on the liner match up with the pieces sewn into the seat. The liner can be removed for washing as nee
Step 3: To install the booster seat, attach the long adjustable strap to the D-rings at the upper back edge of the booster, and place this strap around the headrest of the vehicle seat. Adjust this strap to obtain the preferred position of the booster. Next, fasten the strap sewn into the lower edge of the booster around the back of the vehicle seat and tighten. When installing on a bench seat (such as in the back row), the lower strap will not be used – to keep the strap out of the way, engage the vehicle’s seat belt and wrap the lower strap around the lap portion of the seat belt and snap the ends together.
WARNING: Before traveling, make sure the leash is adjusted short enough to keep pets from jumping out of the basket. An improperly adjusted leash creates an unsafe condition. A harness is recommended rather than a collar for safely securing pets. The Pet Booster Seat is not intended as a safety device. Remove pet before making adjustments to the seat or straps. Never leave pets unattended in the booster seat. Solvit Products is not responsible for injuries suffered by pets as a result of improper adjustment of straps or vehicle accidents.
Cleaning: Promptly wipe up any foreign matter or standing liquid with a damp cloth or sponge. Machine wash the fabric liner in cold water with mild detergent and line dry.
Warranty: The Pet booster seat is warranted to be free from defects in materials or workmanship for a period of one (1) year from the date of purchase. A copy of the original sales receipt is required for warranty issues.
Solvit Products is dedicated to offering innovative solutions to improve pets’ quality of life. Please feel free to contact us with and questions, comments, or warranty issues. Thank you for your purchase!
SOLVIT Products 1114 W Harris, Suite 101 Arlington, TX 76001
Tel: 866-6-SOLVIT (866-676-5848) Fax: (817) 466-2291